Automatic Bubble Turret Project (One Day Challenge)
Automatic Bubble Turret Project (One Day Challenge)
Published 2017-07-10T11:25:40+00:00
https://www.youtube.com/watch?v=PzvsCiyBClc
Hello!
As a part of the one day Project challenge I made a device that can blow bubbles with only a handle to turn and a balloon!
I had a lot of fun working on this project and I had more trouble that I'd like to admit.
I'm a 16 years old student from Israel playing for the local robotics FRC team as the head CAD department.
Time to design and tinker: 4 hours
Time to Print: 11 Hours (a few tries)
Clean-up and video making: 2 hours
Have a nice day!
Printer brand : Printrbot
Printer : Simple Black
Supports : Yes
Resolution : 1.2mm was just enough
Infill : about 15% should be enough
Post printing
Supports
This is a print with very little supports, and no real cleanup needs to be done for them
How I designed this
I used Inventor 2016 in order to design this, I made 3 normal parts and connected them together in an assembly and tinkered with each of them until I got it right.
Date published | 10/07/2017 |
Technology | FDM |
Complexity | Easy |