CANnon Cup Holder
CANnon Cup Holder
3D
Published 2023-02-20T17:01:20+00:00
Whether you're looking for a classy way to holster your 12oz beverage or just some new distinguished desktop décor. The CANnon Cup Holder has you covered.
**Featuring:**
- "Cartoony-styled" cannon cup holder equipped to securely hold one 12oz beverage.
- A display stand that holds the cannon in 2 different positions. One for drinking, one for display
- A removable end cap to assist in can removal.
***This design was a remix of the Blank Can design provided by MandicReally for the Thangs.com Workspace Design Challenge. I spoke directly with @MandicReally and received permission to upload the design here. This design is uploaded with a non-commercial license. Purchasing this file does not grant you the right to sell commercially.
If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
https://www.patreon.com/thinair3D
Printing Info:
**These are just the settings I used to test the model, feel free to use whatever settings work best for you.
- FDM or Resin: FDM
- Scaling: Scaling up or down would work fine, just would no longer hold a 12 oz beverage. The threads for the bolts may encounter issues if scaled too small.
- Supports: None
- Infill/Perimeters: I just used 10-15% infill with 3 perimeters.
- Nozzle Size: 0.4
- Layer Height: 0.2
Printing & Assembly
Just print the cup_holder, cap, and 2 bolts for the cannon portion. The display stand can either be printed all at once in a print-in-place assembly or in 2 separate pieces. The main difference is that the print-in-place version is locked together, whereas the separate-piece version does not lock together.
List of STL's:
- cup_holder (STL)
- cap (STL)
- bolt, need 2 (STL)
- display_stand (print-in-place)
- display_stand_piece_1
- display_stand_piece_2
| Date published | 20/02/2023 |
| Support Free | YES |