Adjustable PCB Holder - 3D Print for Printed Circuit Board Soldering and Desoldering

All of my prints are of Standard Print Size = 210x210x250mm

3 Prints for this machine to assemble.

Many a times, we have to struggle with holding the PCBs strongly in one place for proper soldering and desoldering.

I came up with this idea to make an Adjustable PCB Holder for different sizes.

I promise that its going to work really well for you for Printed Circuit Board component Soldering and desoldering with enough free space for the components between PCB and the Holder Bed.

Let me know your thoughts in the comment section for this design and share your makes as well.

Print = Bed + Slider + Screw for one complete machine.

Please Watch the video for Model performance and assembly.

Simple Assembly Youtube Short Video link below.

PCB Holder Video - https://youtube.com/shorts/QjT5BoI0NaU

BASE :

Object Detail

Max X - 72.5mm
Max Y - 110mm
Max Z - 188.0mm
Wall Thickness - 5mm

Print Detail

Infill - 20%
Build Plate Temperature - 70°C
Support - No
Weight - 151g
Print Time - 3 Hours 18 Minutes

SLIDER :

Object Detail

Max x - 110.1mm
Max y - 67.2mm
Max Z - 42.1mm
Print Detail

Infill - 20%
Build Plate Temperature - 70°C
Support - No
Weight - 100g
Print Time - 3 Hours 57 Minutes

SCREW :

Object Detail
Max x - 40mm
Max Y - 40mm
Max Z - 78.6mm

Print Detail

Infill - 20%
Build Plate Temperature - 70°C
Support - yes
Weight - 5g
Print Time - 33 Minutes

Extruder temperature: 210ºC

Bed temperature: 70ºC

Layer Height - 0.2mm
Wall Line Count - 2
Top/Bottom Thickness - 0.6mm
Top thickness - 1mm
Top Layers - 5
Bottom Layers - 3
Bottom Thickness - 0.6mm

ALL THE BEST !