Skip to content

Water Dispenser Lever for Frigidaire Fridge

fridge_repair.jpg Water Dispenser Lever for Frigidaire Fridge
fridge_water_lever_1.jpg Water Dispenser Lever for Frigidaire Fridge
fridge_water_lever_1.STL Water Dispenser Lever for Frigidaire Fridge
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.1k views
  • 1 like
  • 1 download
License
3D design format
Folder details Close
  • fridge_water_lever_1.STL

Learn more about the formats
3D model size X 63.5 Γ— Y 17.8 Γ— Z 24.2 mm
Publication date 2023-01-29 at 20:25
?
Published to Thingiverse on: 2012-08-13 at 01:53
Design number 1036172
3DGuru

3DGuru

3D printer file info

3D model description

This water dispenser lever is for some models of Frigidaire side by side door refridgerators. This lever is designed to be glued onto what usually remains after the original part breaks.

3D printing settings

This design might fit some models of side by side door Frigidaire refridgerators with broken water levers. It may or may not be the right fit for your fridge - so make some measurements of this print and your fridge's water lever before you attempt this repair.

This replacement part is designed to glue onto the old remaining lever that remains after it fails. You may have to take apart the water and ice dispenser area of your refridgerator to gain access to the lever assembly. See this YouTube video that shows how to do this repair using a standard brand new replacement part: http://www.youtube.com/watch?v=WBBva8A-VLE. This video will help you repair your fridge whether you are using brand new factory part or glueing on your 3D printed repair part.

Be sure to disconnect your fridge from electrical power before working in this part of your fridge. Removing the dispenser assembly screws may run into a few snags if their is corrosion in this area. You may have to cut the heads off a screw or two and back the screws out with vice grips if the heads are too coroded to accept a screw driver. The old broken/failed lever may need to be sanded or trimmed a bit in order to allow the new lever to slip over it. Once you have placed the new lever over the broken lever, glue the new lever onto the broken part using five minute epoxy. Fill in gaps with a two part plumber's putty or steel epoxy. Using an epoxy putty is also a way to reinforce the water lever and new part. Plugging the circuit boards (related to the light and ice panel) back in may be a bit tricky, but is doable. Also note, if you remove the water hose from the panel, you may have to splice in some new hose to make the hose long enough to snake it through the dispenser panel when re-assembling.

Check out the following website for general information on repairs to this part of the fridge (which also has info on ordering replacement parts and installing them). http://www.fixya.com/support/t261969-water_dispenser_lever_frigidaire

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.