Ninja Storm Wind Weapons Bundle- Storm Striker ALL 3 3D print model

Comes with all three weapons in .stl file format inspired from the sentai show Hurricanger (Ninja Storm).

This is a digital download but a kit can be delivered if needed for an increased price on my Etsy

(A kit is made to order and separate purchase from a digital file! It takes roughly 7 days to make one so depending on how busy I am it may take 2-3 weeks to get it made and sent off.)

Hawk Blaster: Final dimensions 222 mm x 652 mm x 424 mm Separated to parts for easier printing and combining. Comes with only Hawk Blaster. (17) 1/2dowels and (4) 1/4 dowels are needed for the blaster, and (3) 12mm neodymium magnets for the slots in the front and 19mm magnet in the back for combining with other weapons.

Lion Hammer: Final dimensions when extended 1273.75 mm x 248.42 mm x 408.75 mm Separated to parts for easier printing and combining. (20) 1/2dowels and (16) 1/4 dowels are needed for the hammer, and (2) 19 mm neodymium magnets for the slot in the front and a magnet in the pivot for the handle for combining with other weapons. IN THE PIVOT YOU WILL NEED A WASHER OR FLAT PIECE OF METAL TO GLUE IN PLACE FOR THE MAGNET TO AFFIX TO.

Sonic Fin: Final dimensions 172 mm x 279 mm x 391 mm Separated to parts for easier printing and combining. Comes with only Sonic Fin Blaster. (4) 1/2" dowels are needed for the blaster, and (3) 12mm neodymium magnets for the slots in the back for combining with other weapons.

DO NOT SHARE OR RESALE, for private use only. Litigation will be pursued in event of violation.

You'll receive the file automatically after purchase. Feel Free to contact me for any issue.

This is a FAN ART, all credits go to the original creator of the show.