SPIDERMAN BODY FIGURE 3D print model

File Contents.

*Print pictures.

*3D Design pictures.

*There are STLx2, .GCODE x 4.

ATTENTION: The design consists of two parts, a bust and a pedestal.

If you want, you can make your design personalized by just making changes on the pedestal. You can also set the design print quality from the .STL file if you want. Spider-Man figure is attached to the pedestal.

You can print directly using the Gcode file. Printing times may vary depending on your printer. It is stated as approx.

Print time (normal) 0.15 mm precision

bust: 6 h 7 min.

base : 1 hour 26 minutes.

Print time (fast) 3 mm precision

bust: 4 hours 30 minutes.

pedestal : 1 hour 7 minutes.

Product size 128.8 x 187.2 x 78.5 mm

pedestal : 76 x 65.7 x 19 mm

Recommended settings

Printing temperature : 200 degrees

Building plate temperature: 20-40 degrees

print speed : 50 mm/s

filling density 10%

These values ​​may vary depending on the characteristics of your printer.

Remember that quality is not just about design.

your printer. Your flamen calibration is also important.

This design is designed in accordance with PLA Flamentin.

For other filaments, please use the STL file.

Thank you for your support.

THE CONTENT OF THE FILE HAS LANGUAGE SUPPORT.

German English French Spanish Turkish