V-12 Engine, Optional Parts Kit, Engine Mount Frame
V-12 Engine, Optional Parts Kit, Engine Mount Frame
Published 2022-11-29T09:06:20+00:00
This kit is the imaging model of “Engine Mount Frame” as option for V-12 Engine uploaded below.
https://www.myminifactory.com/object/3d-print-v-type-12-cylinder-engine-water-cooled-cutaway-255293
In order to install this type of engine on the fuselage, the cantilever beam structure is required to support the center of gravity located forward.
A. Assembly Manual Contents
① Engine Mount Frame Parts
② Display method [1]・・with Central Post as already uploaded
[2]・・only with Engine Mount Frame
B. Purchase Parts Information;
-Aluminum Pipe - φ5 (For convenience, the size is unified)
-Screws & Nut
M1.4 (Screw), M2 (Screw & Nut)
Quantity and size can be adjusted by your experience.
D. STL file
Total STL files are 7 items.
“ws” of last 2 digits of file name means “With Support” special designed.
E. Total Net Print Time: Approx. 9 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.
F. Printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
100% Infill is recommended for Parts having "Hinge, Yoke" to keep strength.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
I wish you success.
See text
Date published | 29/11/2022 |