Buugeng Flow 3D print model

a standard buugeng with wholes

print: 1x handle 1 1x handle 2 1x axel 1 1x axel 2 2x blade 1 2x blade 2 2x blade 3

for mine i use 4x Ø10H3 neodymium magnets 2 on each handle. I've put 2 extra wholes incase use of weaker magnets as long a they are same diameter Ø10 H3 then it will work

ruff up the connecting surfaces for better adhesion

glue handle and blade parts together with a good strong glue glue in the magnets

use a 15mm M4 bolt and knot for the axel

3D PRINTING SETTINGS i recommend 40%infill on the buugeng minimum

higher infill gives more weight, strength and better control

and 90% infill on the axel

print with supports