Sub33D v2.06 sub $100 AUD recycled e-waste 3D printer

Prints (0)

Description

Summary

Please check out new and cheaper $65 Sub33D 2.07 version with improved x-axis motor and idler mounts: 

http://www.thingiverse.com/thing:1429273

Please check out video:

http://www.thingiverse.com/thing:1429273

Sub33D v2.06 sub $100 AUD recycled e-waste 3D printer

Print area 200W x 200D x 180H

High accuracy long life 604/605 bearing construction (No linear bearings)

10mm rods throughout design (stiffer, less vibration)

Ridged frame design (minimize frame flexing)

Designed to utilize recycled printer, PC and general e-waste components supplied by Substation 33 

Component cost excluding recycled components under $100 AUD 

Main purchased components:

Electronics (Mega, Ramps, LCD, etc) Hot end Heat bed Threaded rod and small number of screws and Wade Extruder bolt Printed parts approx 0.5kg

Main recycled components:

8mm acrylic sheets from PC LCD monitors

10mm chrome steel rods recovered from office printers

Nema 17 stepper motors recovered from office printers 

ATX 350W PC power supply screws, rubber bushes, heat sinks, fans recovered from office printers and PC's

16mm laminated particle board base plate recovered from old kitchen cabinet

Heat bed glass recovered from office printer

Wiring recovered from Ethernet LAN cable (multi stranded wire, not solid core) and PC power cords (10A wires)

Bearings recovered from office printer stepper motors (non Nema type stepper motors)

Built and filmed on location:

Substation 33 (www.substation33.com.au) 31 Mary St, Kingston QLD 4114, Australia Ph +61 (07) 3826 1533

Please check out the following Youtube video build sequence play list for detailed build instructions (still under construction): https://www.youtube.com/watch?v=0eCutGJ9l7U&list=...

Design Files

File Size

25mm_x_M6_tube_bush_2.01.stl
14.1 KB
LCD_spacer_v2.01.stl
12.8 KB
x-endstop_v2.03.stl
21.6 KB
y-motor_mount_v2.02.stl
22.4 KB
y-idler_v2.02.stl
21.8 KB
y-endstop_v2.01.stl
33.5 KB
2mm_heatbed_bearing_mount_v2.02.stl
26.8 KB
Big_and_Small_Herring_Bone_Gear_Nuclear.stl
1.01 MB
Psu_corner.stl
11.6 KB
x-axis_clamp_v2.03.stl
10.6 KB
spool_45deg_base_v2.04.stl
27.4 KB
x-cable_mgmnt_v2.01.stl
36.6 KB
Ramps_slide_brackets_v1.01.stl
188 KB
y-axis_bracket_v2.03.stl
34.8 KB
80mm_fan_mount_v2.01.stl
9.07 KB
Sub33D_v2.06_printed_parts_list.pdf
11 MB
Sub33D_v2.06_material_info_and_dimensions.pdf
514 KB
z-top_left_v2.01.stl
57.1 KB
z-motor_mount_left_v2.01.stl
70.2 KB
z-top_right_v2.01.stl
74.4 KB
z-motor_mount_right_v2.01.stl
87.2 KB
z-endstop_v2.03.stl
22.9 KB
y-belt_clamp_v2.01.stl
16.3 KB
x-idler_mount_v2.05.stl
86.6 KB
x-motor_mount_v2.05.stl
134 KB
x-carriage_v2.05.stl
65.3 KB
x-carriage_2mm_spacer_v2.05.stl
13.9 KB
belt_clip_v2.02.stl
20.5 KB
8mm_plate_bed_bracket_v2.03.stl
38.5 KB
2.5mm_heatbed_bearing_mount_v2.02.stl
26.8 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×