E3D BigBox - Duet Wifi Mounting Adapters

Summary This are mounting adapters for the E3D BigBox to mount a Duet Wifi board (https://www.duet3d.com/). The adapters are designed to fit the mounting holes for the default RUMBA board on the bottom of the BigBox. To mount the Duet Wifi you need four metal hex nuts normally used to mount computer motherboards in their case and four screws for them. Nylon washers under the screws are recommended to prevent a shortcut! My Duet Wifi included some of those washers. Desinged with Onshape (https://cad.onshape.com/documents/c5c1fd333b46af1490c4a1cc/w/1570f7e015d95b93847a9d1f/e/32ef367a7302e29f1ee736d3) Print Settings Printer: BigBox Dual Rafts: No Supports: No Resolution: 0.2mm layer, 0.4mm nozzle Infill: 20%